Third-party part sold under Score Store · Brewing Aerator
Brewing Aerator - Nouva Simonelli — match the part, not the machine name
A spare part is bought against the part it replaces, not against the machine's name. The specifications are first on this page so you can hold them next to the component in your hand: the code, the thread, the dimensions and the rating. Anything the maker or the listing doesn't state is left off rather than guessed, and where fitting needs a technician, the page says so.
Part
Brewing Aerator
Pack quantity
1
Full specifications
As stated by the manufacturer or the listing. Specifications this part doesn't have, or that nobody publishes, are not shown rather than filled in — on a spare part a blank is safer than a guess.
Part type
Brewing Aerator
Brand
Third-party part sold under Score Store
Compatible machines / brands
Nuova Simonelli machines per the listing
Pack quantity
1
Box contents
1 x brewing aerator
Installation & care
Fit into the group water path. Descale and clean during regular maintenance
Does it match the part you're replacing?
Check it against the component you're taking out, not against the machine's model name.
Compatible machines / brands
Nuova Simonelli machines per the listing
Send us a photo of the old part, and the code stamped on it if there is one, and we'll confirm the match before you order. On spares that's quicker than reading model lists, because the same machine name covers several generations.
Fitting it
Fit into the group water path. Descale and clean during regular maintenance
Two habits save most of the callouts we see. Depressurise and disconnect before you start, because a boiler holds pressure and heat long after it's switched off. And fit seals by hand: a screwdriver used to lever a gasket into a group tears the silicone, and a torn seal leaks under pressure rather than on the bench where you'd notice it. Where the line above says a qualified technician, treat that as the instruction rather than a suggestion — pressure vessels and mains electrical parts are not a place to learn on your own machine.
Repair instead of replaceA perished gasket, a blocked steam tip or a failed thermostat ends a machine's service, not its life. The part costs a fraction of the machine.
Identified from a photoSend the old component and we'll match it. On spares that's faster and safer than working from a model name.
Stated, not assumedWhere a code, a rating or a material isn't published we leave the line out. On a part that holds pressure, a blank is safer than a guess.
Is this the right part for you?
Yes, if you
Have matched the code, the thread or the dimensions to the part you're removing
Are replacing a component that's worn, perished, blocked or failed
Know the rating your machine needs, where the part carries one
Can fit it yourself, or have a technician who will
Check with us first if
You're going by the machine's name alone; the same name covers several versions
The part holds pressure or carries mains electricity and you'd be fitting it yourself
You're guessing at a dimension — a gasket is sold in millimetre steps for a reason
A figure you need isn't listed above, which means nobody has published it
In the box
1 x brewing aerator
WhatsApp +971 55 372 4369Send a photo of the old part
Jaddaf Views Building, Shop 5Dubai · Mon to Sat, 8am to 10pm
Same-day delivery in DubaiAvailable at checkout, 7am to 7pm
Tamara and TabbySplit your payment at checkout
What people ask before buying a spare part
How do I know this fits my machine?
Match the part rather than the machine. Read the code stamped on the component you're replacing, or measure it, and compare that with the specifications on this page. Model names cover several generations and regional versions, so a compatibility list narrows the field without settling it. Send us a photo of the old part with your machine's model and year and we'll confirm before you order.
My gasket is 8.3 mm or 9 mm — how do I tell?
Take the old one out and measure its thickness, or check your machine's parts diagram. They look nearly identical in a photo and they are not interchangeable: too thin and the portafilter over-rotates and leaks, too thick and it won't lock in far enough. If you can measure it with calipers, do. If not, send us the machine model and we'll look up which thickness it takes.
Can I fit it myself?
It depends entirely on the part. A steam tip, a gasket, a diffuser or a crank are owner-serviceable with basic tools and care. A safety valve, a thermostat or a pressure fitting is not: those sit in a pressurised boiler or on mains electricity, and the installation line on this page says so where it applies. Read that line before you order, and if it names a technician, arrange one.
Why does the certification line sometimes say none stated?
Because we only publish what is actually claimed. Some parts here carry a formal certification — a safety valve may be CE and PED marked, a gasket may have a food-grade test report — and some are sold without any certification claim at all. Saying so is more useful than silence, particularly on a part that sits in a boiler or touches the water that reaches the cup.
Is this an original manufacturer part?
Read the brand and the part number lines. Some items here are branded components from the original maker, some are third-party parts sold to fit named machines, and where a part replaces an original code that code is listed. None of that is hidden: if a part is a compatible replacement rather than an OEM one, the specifications say what it replaces and the rest is for you to weigh.
The part number on mine doesn't appear anywhere on this page. Now what?
Send it to us. Part codes are how spares are actually identified, and we can usually trace a code to the current equivalent even when the listing doesn't name it. That's a better outcome than ordering something that looks similar.
What if it's the wrong part, or it arrives damaged?
If you change your mind, you can request a return within 3 calendar days of delivery, as long as the item is unused, in its original packaging and in resalable condition — so check the fit before you attempt to install it. If it arrives damaged or defective, tell us within 7 days and send photos or video of the issue. Returns need our approval first, so start with a message or email to info@scorestore.ae. Sale and clearance items can't be returned unless they're confirmed defective.
What each specification actually does
Compatible machines / brandsNuova Simonelli machines per the listing
Read it as a shortlist, not a promise. Makers change components mid-production and sell different versions by region, so a model name on this list tells you the part is probably right and never that it's certainly right. Where the line itself says to confirm the exact model, that caution is deliberate. Match the old component and the list becomes a cross-check rather than the decision.
Installation & careFit into the group water path. Descale and clean during regular maintenance
Follow this line as written — most of it exists because the maker has seen it go wrong. Seals go in by hand rather than with a tool, threaded fittings want the correct tape or seal and no more torque than needed, and parts inside the group get cleaned with your regular backflush rather than left to build up. Where it names a qualified technician, that's a boundary, not a formality.
Pack quantity1
Worth reading twice on consumable seals. Gaskets, o-rings and screens are the parts you'll replace again, and having the spare already in the drawer is the difference between ten minutes of maintenance and a machine that's down until a delivery arrives. If you run more than one machine, buy accordingly.
Send a photo of the part you're replacing.One picture of the old component, plus any code stamped on it and your machine's model and year, is usually all we need. If it's a pressure or electrical part we'll tell you that too, rather than letting you find out with the machine open.
